A leaking water heater may or may definitely not look like a large deal. However, it doesn’t matter if it is a substantial leak or a little leak, either one may result in a whole lot of destruction to ones household in the shape of water damage. Many times people fail to appreciate that a little leak is often the sign of something much bigger that may be beginning to occur, or will occur in the forseeable future. In the worse predicament, that little leak may grow to be a significant flood if the water heater is close to completely giving out. At any rate, we are right here for helping with any kind of Columbia Hot Water Heater Repair that may be required.

Aside from water damage to ones house coming from a leaking storage tank, there are health associated issues with just about any water leak within a home. The wetness can result in mold or mildew development. People who experience allergies or asthma, this is simply not a pleasurable situation. The EPA says that some mold spores are toxic and can lead to serious health concerns.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.  http://www.cdc.gov/mold/dampness_facts.htm

Expecting that an existing water leak will fix on its own and just disappear is a thing that just doesn’t materialize sadly. Plumbing leaks simply get worse over time. We have put together a step-by-step list of actions to take during these cases.

Action Steps for Leaking Water HeatersLeaking Columbia Water Heater

1. Initially make sure that it is actually the water heater that the leaking water is originating from.

When there is water close to where the hot water heater is found, the leak might not always be originating from it. Take a look at all water pipes or other things around where the heater can be found. Are there any other appliances near it which can generate condensation? If ones heater is situated in a basement, this can be the case. It could potentially be a furnace drain line also, or coming from a water softener.

Initially, wipe up the water and determine if it comes back any time in the near future by observing the area routinely. Go over the water heater completely to verify if any water is originating from any of the fittings, T&P valve, or drain valve. If it is entirely dry, continue to look at other things and locations close by.

If nothing else is damp in the general region, put paper towels on the ground in the place which was previously wet. Examine every hour or so to verify the paper towels continue to be dry. It will likely be a lot easier to see the paper towels being wet then the floor. Following a day if absolutely nothing is wet once again, there should be absolutely nothing to be worried about, yet still keep an eye on it the next few days. If water is returning, and there isn’t any other origin in close proximity that it may be from, we will continue to the step two here to identify the origin of the leak.

2. Shut the water heater’s power offBreaker Box for Columbia Water Heater

Hopefully, it is common knowledge that water and electrical power never go well with each other, so turn off the power for safety explanations.

For gas water heaters, there should be an on/off dial which should be placed to the off placement. Leave the gas line on at this time still.

For electric heaters, head to the house’s circuit breaker box and switch off the breaker for the water heater.

3. Turn the water supply off

If one is without doubt the leak is originating from the hot water heater, and in cases where it is somewhat sizable, switching the water off will remove the opportunity of water continuing to go into the storage tank and leak within ones household. Again, with a serious leak via the heater, and if the shut off valve is unable to be gotten to or if it is not working accurately, go locate and shut off the main shut off valve for the whole household. If one remains not sure the leak is coming from the water heater, one will be able to keep the water supply on for the present time.

One should be aware that water coming from the storage tank will be hot and will be able to burn ones skin. Most heaters will likely be established to a temperature of at the very least 120° F, which could result in first degree burns on contact.

4. Find the leak’s location

We really do not need to have our Columbia water heater clients to self diagnose their leaks before phoning us, notably if you have a serious water leak situation happening, but in case one can the quicker we can certainly help. The following is a summary of likely explanations why the leak is happening.

Leaking Water Connections
Verify to make sure the cold water inlet and the hot water outlet connections are tight. They’re normally situated at the top of the storage tank. Utilize a pipe wrench to confirm the connections. This is certainly a quick fix when this is from where the leak is coming.

Leaking T&P Valve
Found on the side of the storage tank is the temperature and pressure relief valve. It is going to in addition have a drain pipe going down to the floor from it. The valve regulates how much pressure that builds up in the storage tank. It will let water out when it must control the pressure. This valve may well be the origin of the leak and could need replacing in the event it doesn’t remain closed tight. Glance to see if any water is leaking via the valve. If water is originating from the valve when it is in the closed position, a new valve shall be necessary. This really is a crucial valve of the hot water heater, and one that really needs to operate correctly. However, replacing it is easy and not costly.

Danny Lipford suggests that:

Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/

Initially, experiment to determine if there may well be dirt in the valve. Place a container underneath the discharge tube and open the valve through pulling the tab on the valve. The water which is discharged may flush the valve and eliminate any dirt that may perhaps be in the way.

Other causes regarding a T&P valve leak may be high water pressure with the city water system, or coming from a backflow preventer found near the water meter.Leaking Water Heater Drain Valve

Leaking Drain Valve
Take a look at the drain valve in the bottoom of the heater. They’re ordinarily made of plastic, and as a result, might wear out in time. Be certain that it is closed fully. If the drain valve requires being replaced, it is an uncomplicated fix.

A drain valve leak could be the result of dirt in the valve. Attempt this initially. Position a container under the valve and move the dial to open it. Draining some water probably will remove the debris. In the event after flushing, it continues to leak, it will need to get changed.

In the event that the leak is originating from here and the valve keeps leaking since it requires replaced, try connecting a hose to it and run the hose outside the house. With some luck, that could eliminate the water leaking in the house.

Leak on the bottom of the tank
Whenever the tank leaks from the bottom, it implies a considerable internal concern. Because of precisely how the water storage tank is constructed, being wrapped inside insulation and possessing an outer skin, in cases where it is leaking, it is going to not be visible from the outside. An interior water leak often would be seen at the bottom of the tank. The more aged the storage tank is, the more probable its starting to decay and degrade. A rusting tank will require to be changed.

5. Will I need to have a repair or replacement water heater?

Through our working experience, we’re able to carry out a repair to take care of the leak, far more often then having to replace ones heater. The faster we could have a look at the problem, the more quickly we are able to carry out a repair previous to the damage becoming any worse. We do highly suggest that any sort of repairs or replacements be accomplished by a professional and not oneself, to make sure they are completed properly and up to code. Frequently, manufacturer warranties may be voided if perhaps a non-licensed person operates upon it.