803-796-6326

Water Heater Repair Columbia SC's Blog

Columbia Homeowner advice and maintenance tips for water heaters.

Identifing the Cause of a Water Heater Leak

A leaking water heater may or may definitely not look like a large deal. However, it doesn’t matter if it is a substantial leak or a little leak, either one may result in a whole lot of destruction to ones household in the shape of water damage. Many times people fail to appreciate that a little leak is often the sign of something much bigger that may be beginning to occur, or will occur in the forseeable future. In the worse predicament, that little leak may grow to be a significant flood if the water heater is close to completely giving out. At any rate, we are right here for helping with any kind of Columbia Hot Water Heater Repair that may be required.

Aside from water damage to ones house coming from a leaking storage tank, there are health associated issues with just about any water leak within a home. The wetness can result in mold or mildew development. People who experience allergies or asthma, this is simply not a pleasurable situation. The EPA says that some mold spores are toxic and can lead to serious health concerns.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.  http://www.cdc.gov/mold/dampness_facts.htm

Expecting that an existing water leak will fix on its own and just disappear is a thing that just doesn’t materialize sadly. Plumbing leaks simply get worse over time. We have put together a step-by-step list of actions to take during these cases.

Action Steps for Leaking Water HeatersLeaking Columbia Water Heater

1. Initially make sure that it is actually the water heater that the leaking water is originating from.

When there is water close to where the hot water heater is found, the leak might not always be originating from it. Take a look at all water pipes or other things around where the heater can be found. Are there any other appliances near it which can generate condensation? If ones heater is situated in a basement, this can be the case. It could potentially be a furnace drain line also, or coming from a water softener.

Initially, wipe up the water and determine if it comes back any time in the near future by observing the area routinely. Go over the water heater completely to verify if any water is originating from any of the fittings, T&P valve, or drain valve. If it is entirely dry, continue to look at other things and locations close by.

If nothing else is damp in the general region, put paper towels on the ground in the place which was previously wet. Examine every hour or so to verify the paper towels continue to be dry. It will likely be a lot easier to see the paper towels being wet then the floor. Following a day if absolutely nothing is wet once again, there should be absolutely nothing to be worried about, yet still keep an eye on it the next few days. If water is returning, and there isn’t any other origin in close proximity that it may be from, we will continue to the step two here to identify the origin of the leak.

2. Shut the water heater’s power offBreaker Box for Columbia Water Heater

Hopefully, it is common knowledge that water and electrical power never go well with each other, so turn off the power for safety explanations.

For gas water heaters, there should be an on/off dial which should be placed to the off placement. Leave the gas line on at this time still.

For electric heaters, head to the house’s circuit breaker box and switch off the breaker for the water heater.

3. Turn the water supply off

If one is without doubt the leak is originating from the hot water heater, and in cases where it is somewhat sizable, switching the water off will remove the opportunity of water continuing to go into the storage tank and leak within ones household. Again, with a serious leak via the heater, and if the shut off valve is unable to be gotten to or if it is not working accurately, go locate and shut off the main shut off valve for the whole household. If one remains not sure the leak is coming from the water heater, one will be able to keep the water supply on for the present time.

One should be aware that water coming from the storage tank will be hot and will be able to burn ones skin. Most heaters will likely be established to a temperature of at the very least 120° F, which could result in first degree burns on contact.

4. Find the leak’s location

We really do not need to have our Columbia water heater clients to self diagnose their leaks before phoning us, notably if you have a serious water leak situation happening, but in case one can the quicker we can certainly help. The following is a summary of likely explanations why the leak is happening.

Leaking Water Connections
Verify to make sure the cold water inlet and the hot water outlet connections are tight. They’re normally situated at the top of the storage tank. Utilize a pipe wrench to confirm the connections. This is certainly a quick fix when this is from where the leak is coming.

Leaking T&P Valve
Found on the side of the storage tank is the temperature and pressure relief valve. It is going to in addition have a drain pipe going down to the floor from it. The valve regulates how much pressure that builds up in the storage tank. It will let water out when it must control the pressure. This valve may well be the origin of the leak and could need replacing in the event it doesn’t remain closed tight. Glance to see if any water is leaking via the valve. If water is originating from the valve when it is in the closed position, a new valve shall be necessary. This really is a crucial valve of the hot water heater, and one that really needs to operate correctly. However, replacing it is easy and not costly.

Danny Lipford suggests that:

Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/

Initially, experiment to determine if there may well be dirt in the valve. Place a container underneath the discharge tube and open the valve through pulling the tab on the valve. The water which is discharged may flush the valve and eliminate any dirt that may perhaps be in the way.

Other causes regarding a T&P valve leak may be high water pressure with the city water system, or coming from a backflow preventer found near the water meter.Leaking Water Heater Drain Valve

Leaking Drain Valve
Take a look at the drain valve in the bottoom of the heater. They’re ordinarily made of plastic, and as a result, might wear out in time. Be certain that it is closed fully. If the drain valve requires being replaced, it is an uncomplicated fix.

A drain valve leak could be the result of dirt in the valve. Attempt this initially. Position a container under the valve and move the dial to open it. Draining some water probably will remove the debris. In the event after flushing, it continues to leak, it will need to get changed.

In the event that the leak is originating from here and the valve keeps leaking since it requires replaced, try connecting a hose to it and run the hose outside the house. With some luck, that could eliminate the water leaking in the house.

Leak on the bottom of the tank
Whenever the tank leaks from the bottom, it implies a considerable internal concern. Because of precisely how the water storage tank is constructed, being wrapped inside insulation and possessing an outer skin, in cases where it is leaking, it is going to not be visible from the outside. An interior water leak often would be seen at the bottom of the tank. The more aged the storage tank is, the more probable its starting to decay and degrade. A rusting tank will require to be changed.

5. Will I need to have a repair or replacement water heater?

Through our working experience, we’re able to carry out a repair to take care of the leak, far more often then having to replace ones heater. The faster we could have a look at the problem, the more quickly we are able to carry out a repair previous to the damage becoming any worse. We do highly suggest that any sort of repairs or replacements be accomplished by a professional and not oneself, to make sure they are completed properly and up to code. Frequently, manufacturer warranties may be voided if perhaps a non-licensed person operates upon it.

Simple Water Heater Maintenance Tasks

Let’s talk about doing some water heater maintenance today? It will not take very long. . .in reality we were thinking of 10 minutes. You bet, that is all it will require to discuss 2 maintenance jobs that any house owner can complete. The best part is they may help Columbia SC house owners with the following:Columbia SC Water Heater Maintenance Steps

Ensuring ones water heater last for a long time, conserving expenses.
Making sure ones water heater runs safely.
Ensuring that it operates as energy efficiently as attainable, also conserving money.

So with that in mind, let us educate you on how to invest 10 minutes once or two times a year to help prevent any water heater repairs for your Columbia water heater.

T&P Valve Examining

The job of the temperature and pressure relief valve, referred to as the T&P Valve, is incredibly critical. It has the necessary job of making sure excess pressure doesn’t build up on the inside of the water storage tank, which will ensures the water heater does not explode. The infographic below demonstrates the following actions in evaluating it. The lever must be lifted a little then release it. It is supposed to snap back to its original placement quickly. In case it is working appropriately, a little water may be heard moving into the drain pipe beneath the handle that was just raised and the noise of some pressure discharged is perhaps heard. One will be needing a new valve when non-e of these items occur in the course of the test.

Conducting a Mimi Water Heater Tank Flush

By nature, rust and corrosion will happen in the water storage tank due to the chemical reactions going on with the parts that are required to heat the water. We will not go into the complicated chemical details in this article, but by just draining a little of the water, it will help eliminate the sediment, and provide a chance to discover the amount of sediment is within the water heater.

To undertake a tiny flush, position a bucket underneath the drain valve, found at the bottom part of the tank, and open the drain valve. Just drain a couple gallons of water – a few containers full. Allow for the water to sit in the last pail for a number of minutes. After it settles, analyze to see how many things has settled to the lower part of the container. If there is, if the water heater has actually not been drained for a long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible.

Consider precisely how clean the water appears to be. When it does not appear too cloudy just performing the mini flush is going to be okay. When there is a great deal of residue in the water a whole flush really should be performed. If you already know it has not been flushed for many years, if ever, it would be advisable to empty all of it.

We will not be going straight into all the measures here to do this, although for educational purposes, initially lower the temperature. Wait at the least one hour to enable the water to cool off prior to draining it. Instead of using the buckets, it truly is less difficult to attach a hose to the drain valve and drain the water outdoors.

If one begins to be aware of weird cracking noises from the water storage tank, it can be a sign that there may be a large level of sediment building up within. This too significantly reduces the energy efficiency of the water heater.

Water heaters will function rather effectively without having very much maintenance, and quite a few house owners tend not to do any sort of maintenance to them. However, to gain the three benefits mentioned in the beginning of the post, it’s important to at a minimum carry out these 2 responsibilities. If you have any questions or feel as if you desire some help initially, contact us! We are always here to assist and to help hinder an unnecessary Columbia Water Heater Repair.

Water Heater Repair Columbia SC

From Visually.

Removing Water Heater Smells

If perhaps the water coming from the faucets at home doesn’t smell good, there is probably a problem with your water heater. There can be a couple of different reasons for stinky water, but the primary reason is bacteria. If perhaps bacteria is getting in the water, a smell will probably come about. Well water is generally at fault for this developing. Even so, there are a few measures a Columbia SC homeowner might take to stop bacteria from growing in their water and to eliminate current bacteria and smells.

According to Soquel Creek Water District, “The smell is the result of four factors that must all be present for the odor to develop. These factors include:

  • A high concentration of sulfate in the raw water
  • Sulfate reducing bacteria, non-toxic to humans (sulfate is reduced to a sulfide state by the bacteria)
  • Little or no dissolved oxygen in the water
  • Hydrogen (a component of water which may be present due to water conditions reacting with the anode)”  Read more here…

Controlling Water Heater Bacteria Growth

The easiest way to prevent bacteria from growing and causing unpleasant tastes and odors in one’s house, is to ensure the temperature is fixed at 140 degrees or greater on one’s hot water heater. At this temperature bacteria cannot grow and will die. When your water heater temperature is placed any lower than this, bacteria will not only live but can grow.

Cleaning Out Hot Water Heater BacteriaColumbia SC Water Heater Odors

In order to get rid of present bacteria and smells, one will have to utilize harsh chemicals to remove it. Chlorine bleach is the most effective and complete chemical cleaner to use. If perhaps you are making an effort to decontaminate the water and eliminate the bacteria utilizing bleach by yourself, be sure to understand the exact process of to do so. First of all, the electric or gas going to the hot water heater should be switched off. And then the cold water supply has to be turned off. Then, you must switch on one of the hot water faucets in the house. This lets air into the tank. Applying a garden hose, drain the water from the water heater and close up the drain valve once all of the water is drained. After that, it is time to pour in the bleach. One needs five oz of chlorine bleach for each gallon of water the tank retains. Remove the flexible cold water pipe and pour the bleach in the opening. In the event the cold water hose isn’t flexible, it might be a wise decision to get in touch with a pro. Connect the water line once more and refill the tank with water. It’s crucial to close the hot water tap in the house as soon as all of the air is out of the line. It’s likewise really important to run all of the faucets that use hot water within the property until you’re able to smell the bleach. The bacteria which is inside the water heater may also be in piping and taps consequently you should eliminate the bacteria in these areas at the same time. Allow the bleach water remain in the tank and in the piping for around 3 hours not having utilizing any hot water. And then another flush is due. As soon as the tank is drained once more, don’t put in more bleach but fill it back up with water and give it time to sit in the tank and in the water lines for at least thirty minutes. Finally, drain out the water again and refill the tank with water. Allow each of the hot water fixtures in the home drain until you can not smell bleach. Either turn the power on again or relight the pilot light and you should be all set!

For any concerns about water smells, flushing a water heater, Columbia water heater repairs, or any other water heater problems, give us a call!

Signs of a Hot Water Heater Failing

Water heaters usually do just what they’re supposed to do and regularly go undetected until one needs a Columbia Water Heater Repair. However, several of the problems which appear might be avoided by having frequent servicing by an expert. Make sure to watch your gas hot water heater, as several of the issues which might appear might be expensive and harmful for family members and household pets. Here, we’re explaining four signs that your gas water heater could have to be replaced.

Leaking WaterWater Heater Repairs Columbia  SC

In the event there is water on the ground around your water heater or dripping out of a pipe, you might need to replace the water heater. However, depending on where the water can be found and what amount there is, you could possibly be okay. If the water heater is leaking water out of a pipe and there exists some water on the ground beside the water heater, it is most likely the T&P valve. The temperature and pressure valve gets rid of excess steam from the water heater, this steam becomes to water and comes out of the hot water heater by way of a pipe on the side of the tank. If perhaps this is the situation, it’s absolutely natural and necessary for the heating unit to function correctly. Do not attempt to shift the T&P valve and do not obstruct it. In cases where you might be concerned with the quantity of water which is coming out from the pipe, contact an expert! In cases where the leaking water is originating from the underside of the tank, it is almost absolutely time to get a new water heater. When the hot water heater warms water the metal tank expands and contracts, and this movement will result in cracks and minor fractures, that will gradually bring about leaking. When this transpires, it will be time to install a new unit.

Rust

Around the piping coming out of the hot water heater you can find pipe fittings that need to be sealed well to be able to keep the pipe in place plus keep water from dripping out of the opening. If you happen to be observing rust around these pipe fittings, water is getting out of the hole. Although this isn’t a huge leak and will not likely lead to immediate damage to the water heater, in cases where the problem is not solved, severe and costly complications can at some point appear.

Burn Markings

If you’re observing burn marks on the lower part of the hot water heater, there can be 2 likely issues. But, each of them happen to be very serious and each of them call for an expert. One issue may be with the venting. If the venting is clogged or had been mounted improperly, it can cause the exhaust gases to return in the home. This is unsafe and can bring about health issues or fire if left alone for too long. But, this may not signify you must replace the water heater, and that is good. Another potential problem with burn marks may be the flue pipes inside the hot water heater are plugged. This could bring about a lot of unsafe problems and, sadly, the hot water heater will need to be exchanged as soon as possible.

Yellow Flame Color

Gas burning hot water heaters have got a blue flame under the tank while it is functioning. However, if you’re seeing that flame is an orange or yellow shade, rather than blue, the burner isn’t operating properly and will have to be looked over by a specialist.

There are a number of complications which could arise with gas hot water heaters, although having frequent care and yearly examinations, you can avoid the need for an emergency water heater repair in Columbia SC which might possibly be pricey. Give us a call today in case you detect something uncommon with your water heater!

Total Water Heater Maintenance Tasks

Sure there are a lot of unhappy testimonies that property owners have pertaining to water heater maintenance of “stumbling out of bed to the freezing shower.” Well, we are not about to focus on how regrettable of a circumstance that may be. Likewise, we will assume that one understands the basic notion of ensuring ones water heater is serviced systematically in an effort to receive the best out of its expected life, and to make sure an emergency Water Heater Repair in Columbia SC is not needed. This will help one spend less on utility costs as well. All that makes sense we know. While not needed a lot of maintenance, hot water heaters will need some. We are astounded, even though not shocked, by the quantity of customers we come across who haven’t executed any specific servicing to their water heater), listed below are the responsibilities people must be informed about regarding maintenance.

The Probable Duration a Columbia Water Heater Should LastHot Water Heater Repair in Columbia SC

8 to 10 years is the normal amount of time a standard gas water heater will last. There are numerous variables that will have an impact on the all around lifetime needless to say, however this is a good average. Most likely the greatest factor which will impact the longevity of it is actually mineral deposits. The steps reviewed below are presented in hopes of assisting to lower the accumulation of mineral deposits in the storage tank of a water heater.

Ways to Reduce a Columbia Water Heater Repair

Homeowners, even those which never feel extremely handy, can perform a lot of water heater preservation independently. Although in most cases, a water heater will function harmless, remember that they actually do run from an electrical source and/or gas. Thus suitable safety measures should be put into practice by Columbia property owners. Remember to apply these guidelines as an informative tutorial, for we would much rather explain all these together with you in person.

First, the hot water heater’s electrical power needs to be turned off ahead of engaging in any routine maintenance. Ones breaker box hopefully has a switch labeled that indicates which breaker is the heater’s. House owners who possess a gas water heater, rotate the gas cutoff counterclockwise in order to switch off the gas.

Anode rods, or referred to as sacrificial anode rods, are the section of the heater that aids with controlling rusting inside the water tank. The majority of are constructed from aluminum while others are made out of magnesium around a steel wire. In time the external covering of the rods will erode and they really should be replaced when the steel wire is obvious. They ordinarily last around 5 years, though that can be reduced if ones water is soft. In the long term, it is better and less expensive to have the anode rods replaced, in order to have a long life from the water heater storage tank. The rods should be examined on a yearly basis.

Have a look at the following video which illustrates the procedure of changing the anode rods:

The next water heater component this article will look at are the dip tubes. Not every water heaters possess them however. They should be examined every 6 months for corrosion. To evaluate it, remove it and compare its length to the height of the water heater. It should be about 6″ to 8″ shorter compared with the tank. It will need replacing whenever it’s shorter than that, or displays signs of breakage or crumbling.

Forms of water heater flushes. Once more, mineral deposits are the biggest cause of water heater breakdowns. How fast sediment establishes inside the storage tank is determined by the quality of ones water. In time, this sediment can harden, triggering weird sounds from the storage tank, reduce the effectiveness of the water heater, and potentially clog the drain valve. If possible, every 6 months, but at least once a year, empty 1 or 2 gallons of water from the drain valve at the bottom of the hot water heater in a pail or through a garden hose in a bucket outdoors. Look to check out what amount of sediment is within the bucket when the water settles. If it seems to be fairly clear, that great! If these small flushes are done two times per year, one will possibly not have to complete a big flush as often. If the water appears really cloudy, a full flush needs to be done. It is also a good occasion to ensure the bottom drain valve of the storage tank is working good and not leaking. These are ordinarily made of plastic and as time passes when they aren’t opened up, they are going to get stuck or not close securely, which is why it really is advisable to open and close them in the course of the small flush test.

The flushing process can assist with removing hot water smells that can also occur too.

The advantages for flushing a water heater are illustrated in the following video:

For everyone that has vacation homes or seasonal homes, one ought to drain the storage tank of all its water to help in order to avoid any flooding throughout the seasons the house is not lived in. Needless to say, ensure to refill it while the dwelling is to be lived in once more.

Inspecting water pipes. Look to be certain all water pipes do not have leaks or are defective at all. This should be simple and easy to see when there are any leaks coming from any part of the water plumbing or storage tank for there will be water below and/or near the unit. Leaking water can result in water damage to elements of ones house, so be sure that all seems dry, especially if the heater is located on the inside of the house and not in a garage.

T&P valve examination. Yearly, the T&P valve, or temperature and pressure relief valve, will need to be examined. The T&P valve’s purpose is to preserve the water heater storage tank from too much pressure, and blowing up. The owners manual must be looked over to guarantee the proper ways are implemented but listed here are the standard techniques. A little water may come out of the valve and will probably be really hot so be careful. Raise the lever and let go of it. Have a container prepared to catch any unwanted water which can come out. Additionally, the noise of pressure being released will be observed. The lever ought to snap back in place. If it fails to try it once again. In cases where after a few tries it will not go back again into place, a replacement will likely be needed. The valve could drip some water afterwards for a little while. If it does not quit dripping after a few hours let us know.

Throughout the years, much debate has happened on precisely what the best temperature ought to be for a water heater. Manufacturers commonly pre-programmed heaters to a setting of 140 degrees, which is actually warmer than the majority of people will ever have to have. 120 degrees is the standard temperature and a number of people actually go as far as 100 degrees. We are writing more about this, but we advise having the temperature to approximately 120 degrees.

Steps For Gas Water Heaters

Every 3 months is a good time to looked over the gas venting system. All the fittings ought to be checked to be sure they are tight, look for blockage, and search for damage to the vent piping, and also ensuring these are totally free of rust and deterioration .. Fumes are vented to the outside of the household with gas fired heaters. If these gasses make their way inside of the dwelling it can be poisonous and a fire danger. Ensure everything flammable or corrosive is far from the exhaust ventilation to help alleviate problems with fires. Any loose, damaged, or corroded portions of vent pipes should be updated.

Check the pilot light to conduct a visual test of the way it is working. The task of the pilot light will be to ignite the gas burner that heats water for the home. For ones water heater to function at top performance, it is very important for the pilot light to be clean. The flame color should really be blue with natural gas heaters. For propane heaters, the flame ought to be blue/green with only a small amount of yellow at the tip. A weak flame, a yellow flame, or a flame which has a split flame at the top signifies that a modification is necessary.

Guidelines For Electric Water Heaters

Applying insulation wraps or blankets covering the storage tank can certainly help retain a continuous temperature inside the storage tank without needing as much power. Moreover, by the heater not needing to run as often will increase the life span of the heating element since it will not be used so much. Every so often, check the insulation cover to ensure it is still attached and hasn’t fallen or moved on the water storage tank.

Routine examination of the heating element is very important and definitely will help lessen the need for an unexpected emergency repair. We aren’t going to get into the particulars for a complete inspection in this article, however one will need a voltage/OHM meter to be certain there exists a closed electrical circuit. Heating elements do need updating occasionally.

The area around a water heater needs to remain clean of dirt. Especially if the water heater is placed in the garage, be certain to give the space a sweeping on a regular basis. Ones heater will function a great deal better and be not as likely to call for a Columbia Hot Water Heater Repair if it stays clean.

Replace Old Water Heaters With Energy Efficient Ones

At present, nearly all water heaters manufactured possess a nice amount of energy efficiency. In April 2015, stronger efficiency codes were started in the U.S. for water heaters. Certainly, the better the heater, the longer the life one is certain to get from the unit with the ideal servicing over the years. Don’t be reluctant to call Water Heater Repair Columbia SC to discuss water heater maintenance or maybe to answer any problems on picking out the most proper replacement water heater for ones household or office. Brand, model, and size need to all be considered in the selection process and not simply use the “bigger the better” slogan. Regarding storage tank water heaters, it is a waste of energy to have lots of surplus water being always heated up to a hot temperature if it is not getting used.

How Healthy Is Your Water Heater

Most people don’t ever give thought to the state of the property’s water heater Water Heater Repair Columbia SC knows. Rightfully so, provided that it is working properly. Nonetheless, a little water heater upkeep can go a long way toward decreasing the number and frequency of repairs, and in fact assists to increase the life of the heater, staying clear of very early replacement. Find out exactly how keeping your water heater can impact its life expectancy and offer you less stunning minutes of cold water.

A Healthy Water Heaterhot water heater repair Columbia SC

While it is difficult to figure out specifically how long a water heater ought to last, an effectively serviced, quality water heater can last 8 to 10 years. Naturally, lots of aspects will influence the life-span, consisting of electrical power abnormalities, the quality of the water heater, and the mineral density of the water. Routine water heater service can likewise decrease electric costs by helping it operate more efficiently.

Among wears out a water heater are mineral deposits. A great deal of cash is invested changing heating elements and entire tanks, when a little upkeep periodically would assist to prevent this expenditure from happening. A healthy water heater is one that is insulated, clean, and without electrical wiring faults.

Troubles with ones water heater typically end up being self-evident: A hot water faucet is not able to bring hot water, there are leaks or puddles near the water heater, or the tank sends out unusual gurgling or popping noises. These are a couple of caution indications informing you when your hot water heater requires changing.

It would be great to recognize prior to your water heater has a leakage and triggers a trouble or even worse yet damage to the residence. If you identify you have a few of the very early indication you will have time to evaluate your selections of sizes and versions and pick a certified installer as opposed to hurrying to discover a replacement water heater on a Friday afternoon or even worse on a weekend.

Below are some indicators that you might need a a brand-new hot water heater:

Age: Normally, a gas hot water heater must last anywhere in between 8 to 12 years, while an electric version will last a bit longer at 10 to 15 years.
Stained Water: When you utilize your hot water tap, does the water look a bit colored? If so, there could be rust in the water heater, which is a possible indication the hot water heater is revealing indications of wear and might begin to leak.
Banging or Popping: When there is a accumulation of hard water sediment in the water heater,it might could sound like explosions. These sounds are triggered by the difference in water temperature inside the tank as new cold water mixes with the heated water of the tank.
Moisture: Look around the base of the water heater for wetness, for this could be a sign of a slow-moving or periodic leakage.
Cold Water: An unanticipated cold shower is not just bad means to begin your day, however of a hot water heater that has to be had a look at.
Significant Water Leaks: It’s time to call Hot Water Heater Repair Columbia SC now.

Solar Water Heating Options

Many of us look at the field of alternative energy and the idea of going eco-friendly as a trend, and one which may be not any longer popular. Although that could be the situation for some individuals, the demand for not only us in the United States to be much more energy aware, but as a global society, continues to be a requirement. This post is not intended to be a complaint of a lot of people not becoming energy mindful enough, rather a chance to evaluate the solar energy alternatives for water heating.

Solar water heating is a realistic option for lots of individuals, and has grown into considerably more of a method regardless of the area of the United States one resides in as technology continues to grow. A very good case in point of this position is to think about Germany. With regard to climate and the accessibility of solar energy, Germany is comparable to Alaska. However, Germany is an innovator in solar energy research, advancement and use. As a country, Germany made the choice to do this, and it is performing nicely for them. Understanding that, the capability for property owners in any portion of the U.S. to take advantage of implementing solar energy, and not only for water heating, is a possibility.Solar Water Heaters Columbia SC

While technologies grows and much more readily obtainable in the U.S., the equipment expenses for employing solar water heating will proceed to decrease, which in turn can certainly make it a less costly option for the regular home owner. Considering the April, 2015 brand new water heater specifications in the United States, the price of the majority of new water heaters has grown. Nevertheless, the brand new water heaters made are going to be even more energy efficient, and that is a positive.

According to SEIA, more than 9 million U.S. household water heaters are changed on a yearly basis. That is exceptional information to producing a more sustainable world. Many home solar water heating systems may be set up in a day.

The 2 forms of solar water heating systems are active systems and passive systems. Active systems take advantage of an electric pump to circulate the water. These are the most typical in the U.S. for both residential and commercial use. Passive systems utilize thermodynamics to move the water. One can find several versions of the 2 main types of systems that we will not examine in this article, although the U.S. Department of Energy has fantastic info about them here.

Solar water heaters are made up of 3 primary components: the solar collector, insulated piping, and a hot water storage tank. Electronic controls could also be included, along with a freeze protection system for cooler areas. Solar radiation arrives at the solar collector, the solar collector absorbs the heat and transfers it to potable water in the system. Flowing out of the collector into a hot water tank, the heated water is accessible and utilized on demand. Either system will offer up to 80 percent of the required hot water requirement of a house or building. A usual household may minimize its CO2 impact by an average of 28 percent then as well.

Sizing a Columbia Solar Water Heater System

Residential solar water heater systems are usually sized comparable to that of a standard water heater, by the quantity of hot water generally utilized. A residence that might utilize 50 gallons of hot water on a daily basis can take advantage of a 2 solar panel system. Water heater installment businesses just like Water Heater Repair Columbia SC have unique methods we utilize to help establish the solar panel sizing for the quantity of hot water necessary on a daily basis, per location.

Parts of a Solar Water Heating System

Solar water heating systems comprise a solar collector, insulated piping, heat transfer fluid, a hot water storage tank, and a system controller. Solar water heating systems operate as follows:

The solar collectors absorb sunlight, causing the fluid inside to heat up.
A controller senses that the collector fluid is hotter than the storage tank and signals a pump to turn on.
The pump circulates heat transfer fluid which carries heat from the collector to the storage tank.
The storage tank holds the heated water which is used as necessary. Auxiliary heating remains connected to the storage tank for back-up heating when needed.
http://www.seia.org/research-resources/solar-heating-cooling-energy-secure-future

According to the Union of Concerned Scientists, solar water heating systems cost $2,000 – $5,000 to be set up. One can find quite a few state governments and local utilities incentives obtainable also. They have links on their website here with information about incentives. With normal maintenance and inspection, a solar water heater system may last 20 to 30 years with nominal maintenance and costs.

Water Heater Insulation

Most property owners enjoy getting new tactics to help lower heating costs in the cold months we realize at Water Heater Repair Columbia SC. And, considering that ones water heater works a lot more in the wintertime doing just that, we have gathered some suggestions to pass along today on ways to save on energy costs.

Here is a simple method to determine ones water heater’s need for insulation: put ones hand near or on the exterior of the water heater’s storage tank. It is feels warm, insulating the tank is suggested. This loss of heat in the winter season will add up. After that, in the summertime, it can add heat to the space that one will want to attempt to cool if the water heater is established within the house and not in a garage. Any heat that is felt is undoubtedly heat getting sacrificed. If it is not warm at all that is a great indication that the tank’s internal insulation is in respectable shape. Brand-new water heating units are being produced with a good quantity of internal insulation today. The R-value is found on the producer’s tag so one can see exactly what the number is. If it R-24 or higher, one will most likely not have to use an insulation blanket on the water heater.

Columbia Water Heater Blankets

A water heater blanket or wrap can help get rid of a lot of this heat loss. Initially consult your energy company, for many give insulation kits at minimized expenses for property owners. These hot water heater blankets be available in various sizes depending upon the gallon size of the storage tank. The greater the R-value, the greater the insulation is. It is recommended utilizing one that is at the very least an R-11.

The blankets are straightforward to fit. They will have insulation tape to complete the joints of the blanket. The shinny or vinyl side should go on the exterior.

With gas water heaters, wrap it around, while not covering the top flue, and unwrapped over the controller at the bottom. Likewise, never cover the T&P valve lever, or the underside of tank for this will prevent air from getting into the tank. With electric water heaters, because there is no exhaust flue on the top, it may be covered, however do not cover the heating-element access panels.

These water heater blankets will certainly last a very long time. It may be used again anytime the water heater is changed, providing it’s the exact same size to match the storage tank.

Water Heater Pipe Insulation

There’s 2 different kinds of pipe insulations that must be utilized for a water heater. All pipes situated inside of six inches from the water heater exhaust flue, fiberglass insulation wrap must be utilized and must be connected with either high temperature aluminum tape or wire. Pipes beyond 6 inches can be covered in foam insulation sleeves.

The United States Department of Energy recommends that property owners insulate a minimum of six feet of the pipe entering and from the water heater. This can improve the temperature level at the faucets 2 to 4 degrees and conserve cash on heating. We likewise recommend wrapping both the cold and hot pipes too.

Energy Savings from Columbia Water Heater Insulation

Insulating an ineffective water heater will help trim the expense of operating that heater by 5 % to 10 %. Depending upon the design, that can conserve anywhere from $5 to $20 annually, meaning that a water heater blanket can be paid for in 1 to 4 years. Adding insulation may possibly cut down standby heat losses by 25 % – 45 % and conserve around 4 % – 9 % in water heating expenses.

Columbia Water Heater Sediment Removal

If you have an issue with sediment, you’re most likely currently familiar with it. Gas fired water heaters in specific typically suggest that there is a sediment issue with rumbling sounds each time the tank cycles, while still preserving great water temperature level. Fortunately, sediment can quickly be eliminated, and help prevent the need for a Columbia water heater repair.Water Heater Repair Columbia SC

If you have a gas water heater, turn the control to pilot. If you have an electric design, you must shut off the electrical energy at the panel. Next turned off the water above the heater so no brand-new water can get in the tank. Then connect a hose to the drain valve. The various other end of the hose must ideally go to a floor drain, although a container can likewise be utilized.

Open the drain valve to eliminate all the water from the tank. Many of the sediment must be eliminated by this easy act. Keep the drain valve open, however switch on the water also, enabling some to get in the tank. Turn off the water after a couple of minutes. Repeat this a number of times to coax as much sediment out with the water.

As a last procedure, close the drain and fill the tank a minimum of half full. Then you can drain it for a last time to eliminate any last remains of sediment. To avoid additional typical sediment issues, you can set up a sediment filter for your tank if your issue is mainly with sand. A sand filter must be set up on the cold trunk line.

Often sediment can likewise obstruct up the drain valve itself. Preferably you must have the ability to wash the valve out under high pressure, however often the valve has to be changed after a cleaning. You can achieve this job while the tank is still complete, simply shut off the gas or electrical energy and await the water in the tank to cool. You must likewise not utilize any water in your home will finishing the replacement.

To eliminate the drain valve, just utilize a big groove joint pair of pliers to turn off the old valve. Then set up a replacement valve by turning it in clockwise. Make sure to utilize pipe thread sealing tape or pipe joint substance on the threads to guarantee that the connection will prove out.

If you are preparing to eliminate the drain valve, you might think about prior to setting up the replacement valve providing your tank a last flush. This is finest done if you have a floor drain that will rapidly drain the water and sediment.

The follow video illustrates this process:

Lots of people erroneously think that a sediment filled tank or a leaking drain valve is source to change the whole hot water heater. By these easy upkeep actions, a lot of property owners must have the ability to handle any issues on their own. Obviously, Water Heater Repair Columbia SC is here to assist with this or any other water maintenance that ought to be carried out for you.

Take a look at a few of our additional related water heater repair and maintenance articles:

Springtime House Maintenance Tips

How to Avoid Water Heater Explosions

Springtime House Maintenance Tips

Springtime is an enjoyable period of the year without a doubt, but it does bring with it several house chores for home owners. Water Heater Repair Columbia SC would like to write about some upkeep jobs to carry out around our home to make sure ones plumbing and other systems are working as well as possible. Many of these tasks will not take long to do and will assist rather a little bit in protecting the value of ones house, in addition to making it more energy effective.

Water HeaterWater Heater Repair Columbia SC
The average life of a water heater is from 8 to twelve years. It’s suggested to inspect to check out if one can find any leaks or rust happening at the tank’s base, and if there are any water leaks because of rust, it is a excellent sign that the water heater will need to be replaced regrettably. If your property has hard water, it might be essential to drain the water heater to reduce deposit accumulation in the tank. This need to be done two times a year to maintain the heater working effectively. It at the same time helps make it work quieter as well!

Plumbing
If one finds any leaking water fixtures, change washers as required, regardless if your feline likes to sit in the tub and lick the leakage. And do not forget to inspect for under-sink and dishwasher leakages and repair as required. Although it’s early spring and not warm enough to sweat carrying out these tasks, see to it the water pipes aren’t also. Additionally see to it drains are running easily and the washing machine hoses are not protruding, fractured, or damp. Nobody needs water destruction from a badly leaking clothes washer!

Outdoor Faucets
Turn all outside water fixtures back on…ideally they had been turned off in the late fall time. Furthermore inspect for leaks from them and yard hoses.

Refrigerators
The refrigerator is among the most significant power eaters in the household, so ensuring that the door seals are tight is necessary. To check this, shut the door on a dollar bill and in the event it can quickly drawn away, the door latch might require a readjustment or the seal might require being changed. Surprisingly, a small little bit of air loss can lead to greater energy costs. And it’s likewise a great time to clean up the back coils as that is an additional reason for ineffectiveness.


Storm Windows and Screens
The extreme variations in temperature level in between the winter season and springtime can ruin caulking or rubber seals all over a house’s windows and exterior doors. Take some time and look at them. It is actually a basic repair and the energy costs will mirror the time spent. Any detachable storm windows can be taken down, washed, and substituted with window screens. And, do not forget to mend holes in windows and door screens to shut out mosquitoes and various other small bugs.

AC Units
Inspect portable AC systems to see to it they are performing and filters are replaced. The warm weather condition will come earlier than one generally believes. An AC unit not merely cools you down, however an effective AC unit decreases humidity from the household, which can really harm the foundation if left unattended. Enter the practice of altering or cleaning the filters of both a main system and portable systems once a month as dust and dirt lowers effectiveness. It si important for central AC systems that the hose connections are not leaky and the drain pans are draining effectively. If a condensate drain line ends up being obstructed, it might be an accumulation of algae. If this holds true, utilize a wet-vac to draw out any obstruction. And as well, clear out the ducts likewise.

Hot Water Heater Repair Columbia SC hopes these projects are useful and will be included in your to-do lists! Take a look at some of our additional water heater information here:

Water Heater Troubleshooting Strategies

Repairing a Noisy Columbia Water Heater

How to Avoid Water Heater Explosions

Luckily the following does not occur that frequently, however a water heater has the possibility to blow up and trigger significant damages to a house and people. It is simple to have the frame of mind that it is one thing that occurs to various other individuals, however without appropriate attention for ones water heater, it might possibly occur to you.

Water Heater Repair Columbia SC does not desire to trouble anyone, however desired to show some various videos we put together to show this point.

The first video is video footage from a Phoenix property owner that had an electric water heater blew up soon after he was carrying out some upkeep on the heater.

The next clip is from Walnut, CA. it is provided by WaterHeaterExplosions.com and the storyteller does an outstanding task of discussing exactly how the surge occurred and exactly what kinds of actions a property owner can require to avoid it.

So exactly what are some tactics to stay clear of this from taking place at house? There are several straightforward common upkeep tips property owners can do. Nevertheless, we cannot stress sufficiently to have an expert have a look at your water heater occasionally as well, to be certain it is operating appropriately.

And finally, some individuals always like to check this principle. The next video holds true with a 50 gallon water heater that hit 330 psi of pressure.

Likely the most seen video of examining this principle is from Mythbusters, since they simply like to blow things up. Take pleasure in the last video and keep in mind that water heater security is not something to be taken for granted or lightly.

The following is an infographic we have prepared that displays all the essential water heater maintenance duties that property owners need to make certain to maintain too:

Hot Water Heater Repair Columbia SC

Hot Water Heater Repair Columbia SC’s Related Articles

Ideal Water Heater Temperature Setting

Water Heater Troubleshooting Strategies

Ideal Water Heater Temperature Setting

Today Water Heater Repair Columbia SC is going to be investigating the diverse feelings on exactly what temperature level a water heater should be established. We will have a look at a few of the various perspectives with particular facts from those sources to make sure that one may make his/her own determination on the issue.

To start with, the by default setting a large number of water heater companies have their tanks placed at is 140 degrees. If this is something you have never looked at, that could be what it is set at. Likewise, it can be challenging to understand for certain exactly what the temperature setting is due to the fact that sometimes the temperature level dial will not have actual degrees printed on it, simply warm, hot, really hot … something to that end. Some think brands have a high pre-set temperature level to look remarkable to have a great deal of hot water – sort of like attempting to produce excellent brand name recognition.

In regards to energy cost savings, through changing the water heater level from 140 to 120 degrees, will conserve somewhere between 6 to 10 % of energy usage. That translates to in between $6 to $20 yearly most of the time.

Let’s begin with possibly the most popular resource, the U.S. Department of Energy. They recommend a setting of 120 degrees. The link to their website above offers decent material on the best ways to lower ones hot water use and expenses. It is for sure well worth a read.

There can be health threats with having a temperature level setting that is too low. It can be concluded that Legionella bacteria has the best development range in between 68 to 122 degrees. It is presumed that 25 % of all water heaters are infected with Legionella bacteria at differing levels.

Legionella bacteria triggers a kind of pneumonia and is transferred to people if one breathes in water infected with the bacteria – normally in showers and even AC systems. It is generally ok to ingest the water. It is a concern when the germs get in ones lungs.

The Centers for Disease Control and Prevention approximates 8,000 to 18,000 Americans get the condition each year. 5 to 30 % of the instances are deadly.

According to OSHA, “At low levels of contamination, the chance of getting Legionnaires’ disease from a water source is very slight. The problem arises when high concentrations of the organism grow in water systems. Water heaters, cooling towers, and warm, stagnant water can provide ideal conditions for the growth of the organism.”  (read more)

There are circumstances when one is not going to need the water heater temperature level to be set at 140 degrees also.  If there are kids in your house or possibly with elderly individuals, this might be way too high of a temperature. The threat of getting burned if the faucet was totally on hot water can be very great. Clearly, any individual living in the house that is at threat of contracting Legionella Disease need to have it set at 140 degrees.

In conclusion

So come to a decision if there are any fears of family members becoming burnt if the water temperature level is too hot. Additionally, be alert of any individual who may have worries of being infected with Legionella Disease. Given that the annual expense savings of turning the temperature level down is just about $20 the majority of time with the common residence’s hot water use, it could be an excellent choice to maintain the temperature level above 120 degrees merely for the overall health related advantages; nonetheless, Hot Water Heater Repair Columbia SC will let you determine that.

The following infographic sums up our discussion clearly:

Water Heater Repair Columbia SC

Water Heater Troubleshooting Strategies

A hot water heater is a hard working appliance. Day or evening, it’s creating completely heated water whenever you desire it. So when it all of a sudden is no longer working correctly, many of us have the tendency to overreact.

Luckily a nonfunctioning water heater does not constantly indicate an expensive repair work. Prior to making an emergency call to Water Heater Repair Columbia SC, we recommend inspecting the issue yourself first.

Columbia Water Heater Repair Troubleshooting

Check the Pilot Light

For a gas water heater, eliminate the small panel on the bottom of the system and examine to observe if the pilot light is illuminated.
Spark it with a match or lighter to re-ignite it. If it remains lit, the water heater must kick-in and begin operating appropriately.
If the pilot burner on the water heater does not remain ignited, you might have to change the thermocouple or have the burner cleaned.

Replace the ThermocoupleWater Heater Repair Columbia SC

It appears like part of a space ship, however it’s really an easy system that you can change on your water heater.

Refer to the owner’s handbook. It must have directions for the best ways to eliminate and change the thermocouple.
Shut off the gas prior to taking out anything at all from the water heater.
Using the directions in your individual’s handbook, eliminate the thermocouple by removing it from both sides of the aviator line.
Change the thermocouple on the water heater with a brand-new one that is cut to length.
Turn on the gas and check for leakages, then re-light the pilot light.

Hit the Reset Button

If you have an electric water heater, find the reset button and push it till you hear a click.
If you do not hear a click, or it falls short to reboot the water heater, reset the breaker.
If a breaker reset does not do the technique, you might have to change the thermostat.

Change the Thermostat

Turn off the power to the water heater, and change off the breaker it is linked to. You do not desire to electrocute yourself!
Use the owner’s handbook to find the thermostat wires, then detach them.
Eliminate the thermostat and have it checked by a home appliance dealership. If it is malfunctioning, change it.

Change the Heating Element

With the power still changed off, eliminate the gain access to panel on the water heater.
Loosen the terminal screws and pull the wires far from the heating element.
Eliminate each element of the element and have them checked by a home appliance repair shop. If they are malfunctioning, change them.

Your water heater must be going in no time. If these actions fall short to repair your hot water heater, or if you do not feel at ease doing them by yourself, call Hot Water Heater Repair Columbia SC.

More Resources

Repairing a Noisy Columbia Water Heater

Columbia Water Heater Repair Video

Repairing a Noisy Columbia Water Heater

Water Heater Repair Columbia SC is frequently being consulted to check out at water heater. Popping and knocking noises can be as a result of problems with the water heater, but it’s likewise an aggravation. We are going to explore the most typical reason your water heater may possibly begin producing noise and what you can possibly do to calm it down! Prior to consulting a Columbia professional, have a look at one of the most frequent water heater difficulties and remedies.

The most likely reason a water heater will make noise

Again, if the sound is an indicator of problems with the heater that trouble is probably sediment build up. The sediment stems from the water in the storage tank. It is largely comprised of calcium and magnesium debris and is particularly a difficulty in residences which may have hard water.

If the sediment starts to accumulate at the bottom of the storage tank, it traps a little part of hot water beneath it. This triggers the hot water to boil as the tank works. The sounds noticed are the bubbles popping through the sediment.

Furthermore, the sediment itself could be the source of the sounds. The sediment sits at the bottom of the tank and can get burnt up creating unusual sounds. And on occasion, the sediment will get carried up to the top of the tank and breaks off creating sounds as it plunges back down, bumping the sides on its way.

How to avoid a water heater from producing noise

If sediment build-up is what’s creating the sounds, the heater should be examined. Hot Water Heater Repair Columbia SC can accomplish this and provide the tank a flush or advise a different remedy.

You can also avert sediment build-up by having expert routine maintenance conducted on the storage tank a minimum of annually. This procedure involves flushing the tank of any sediment.

An additional good possibility is to add a water softener in your Columbia house. Water softeners get rid of minerals from the water prior to it entering the water heater, dramatically decreasing sediment build up.

To learn more about other probable problems and remedies provide Water Heater Repair Columbia SC a phone call!

Columbia Water Heater Repair Video

We absolutely love the things we do here at Water Heater Repair Columbia SC and look forward to assisting as many of our Columbia friends and neighbors as possible. We will continue to feature information on water heater maintenance right here in this blog too.

We wish to share our brand new company introduction video to you below.

We are likewise accessible to assist you with every other kind of plumbing repair you may need done. Whether it be a leaking faucet, drain cleaning, toilet repair, or leak detection. We have witnessed pretty much any sort of emergency plumbing and water heater repair problem you can envision and look forward to making use of our well crafted troubleshooting capabilities!

If you are imagining it is becoming near requiring a water heater replacement inform us as well, for we will do all we can to help support you in that scenario.